CA2 / CA4 / CA6 / CA9
CA series have 2U-3U higher selection, and 150W-1100W power area, CA series had some pursuits for faster of reaction speed higher of damping factor, and greater function, higher level of protect function,production technology of SMD excellent component. Amplifier of CA series also can endure 2Omega; stereo load, bridge 4Omega; load, suit for drive line array speaker system.
|
|
Model |
CA2 |
CA4 |
CA6 |
CA9 |
|
Stereo Power8Ω |
150W |
250W |
400W |
520W |
|
Stereo Power4Ω |
225W |
275W |
600W |
780W |
|
Stereo Power2Ω |
270W |
500W |
800W |
1040W |
|
BTL 8Ω |
450W |
750W |
1200W |
1560W |
|
BTL 4Ω |
540W |
1000W |
1600W |
2080W |
|
Frequency Response |
20Hz - 20KHz +0/-0.3dB |
|
THD+N |
<0.03%@8Ω 1KHz |
|
S/N Ratio |
>90dB |
|
Slew Ratio |
20V/ u S |
|
Damping Factor |
>400 |
|
Crosstalk |
>70dB@8Ω 1KHz |
|
Input Lmpedance |
20KΩ(Balance)/10KΩ(Unbalance) |
|
Input Sensitivity |
0.775V/1.0V/1.4V |
|
Protect |
Overheat short circuits,DC,limit and--softstart,Output |
|
relay-Zero Current Switch,Intellctual Clip limiter |
|
Heigh |
2U |
2U |
2U |
2U |
|
Cross Weight |
21KG |
23KG |
26KG |
27.5KG |
|
Dimensions |
570×570×150MM |
CA12 / CA18
CA series have 2U-3U higher selection, and 150W-1100W power area, CA series had some pursuits for faster of reaction speed higher of damping factor, and greater function, higher level of protect function,production technology of SMD excellent component. Amplifier of CA series also can endure 2Omega; stereo load, bridge 4Omega; load, suit for drive line array speaker system.
|
|
Model |
CA12 |
CA18 |
|
Stereo Power8Ω |
800W |
1100W |
|
Stereo Power4Ω |
1200W |
1800W |
|
Stereo Power2Ω |
1600W |
2200W |
|
BTL 8Ω |
2400W |
3600W |
|
BTL 4Ω |
3200W |
4400 |
|
Frequency Response |
20Hz - 20KHz +0/-0.3dB |
|
THD+N |
<0.03%@8Ω 1KHz |
|
S/N Ratio |
>90dB |
|
Slew Ratio |
20V/ u S |
|
Damping Factor |
>400 |
|
Crosstalk |
>70dB@8Ω 1KHz |
|
Input Lmpedance |
20KΩ(Balance)/10KΩ(Unbalance) |
|
Input Sensitivity |
0.775V/1.0V/1.4V |
|
Protect |
Overheat short circuits,DC,limit and--softstart,Output |
|
relay-Zero Current Switch,Intellctual Clip limiter |
|
Heigh |
3U |
3U |
|
Cross Weight |
42.5KG |
43KG |
|
Dimensions |
650×585×200MM |
CP-200/ CP-300/ CP-500 / CP-600
1 This amplifier is noise-free. It will increase the quality of your work.
2 Excellent circuit type ClassAB.It can make more less distortion and better sound.
3 Integrate protect impact function of the power soft-start, DC output protect function, longtime over-heat protect function, and turn on delay function. It can speedy protect the circuit when the amplifier short circuit and over loading.It works steady on performance for long time.
4 This series amplifier have excellent and natural timbre. The adequate power have very good control for the speaker. It have power from 2×200W to 2×1200W, can matching any sound box.
5 The two dual-speed fans switch automatically to maintain the proper internal operating temperature
6 The unit has various input/output connectors, it have three way sensitivity switch for choose level, stereo, bridged-mono, and parallel mono. It can connect the speaker speedy by the professional SPEAKON.
7 You can be clear at a glance of the working status through the LED indicator in the front panel of the amplifier, and let the operation more easily.
|
Model |
CP-200 |
CP-300 |
CP-500 |
CP-600 |
|
Stereo 8 Ω |
2×200W |
2×300W |
2×500W |
2×600W |
|
Stereo 4 Ω |
2×300W |
2×450W |
2×750W |
2×900W |
|
Stereo 2 Ω |
2×500W |
2×700W |
2×1000W |
2×1200W |
|
BTL |
600W |
900W |
1500W |
1800W |
|
THD+N |
<0.05% |
|
Frequency Response |
20Hz-20KHz |
|
|
0.775V/1.0V/1.4V |
|
S/N Rate |
>105dB |
|
IMD |
0.05% |
|
Slew Rate |
100V/µS |
|
Input Impedance |
20KΩ |
|
CK-150 / CK-250/CK-400 / CK-520
CK series have 2U-3U higher selection, and 150W-1100W power area, CK series had some pursuits for faster of reaction speed higher of damping factor, and greater function, higher level of protect function,production technology of SMD excellent component. Amplifier of CK series also can endure 2Ω stereo load, bridge 4Ω load, suit for drive line array speaker system.
|
|
Model |
CK-150 |
CK-250 |
CK-400 |
CK-520 |
|
Stereo Power8Ω |
150W |
250W |
400W |
520W |
|
Stereo Power4Ω |
225W |
275W |
600W |
780W |
|
Stereo Power2Ω |
270W |
500W |
800W |
1040W |
|
BTL 8Ω |
450W |
750W |
1200W |
1560W |
|
BTL 4Ω |
540W |
1000W |
1600W |
2080W |
|
Frequency Response |
20Hz - 20KHz +0/-0.3dB |
|
THD+N |
<0.03%@8Ω 1KHz |
|
S/N Ratio |
>90dB |
|
Slew Ratio |
20V/ u S |
|
Damping Factor |
>400 |
|
Crosstalk |
>70dB@8Ω 1KHz |
|
Input Lmpedance |
20KΩ(Balance)/10KΩ(Unbalance) |
|
Input Sensitivity |
0.775V/1.0V/1.4V |
|
Protect |
Overheat short circuits,DC,limit and--softstart,Output |
|
relay-Zero Current Switch,Intellctual Clip limiter |
|
Heigh |
2U |
2U |
2U |
2U |
|
Cross Weight |
21KG |
23KG |
26KG |
27.5KG |
|
Dimensions |
570×570×150MM |
|
www.HARVEST.ru
